Modified on: 06/12/2022
What are the criteria to understand if the coil of an e-cigarette is burned and therefore to be replaced? Here’s how to recognize the main alarm bells.
To get the best vaping experiences and choose quality e cigarette liquids and devices with suitable characteristics, it is also essential to pay attention to the correct maintenance of the various components of the device.
In this article, in particular, we will tell you about the coil.
How to understand when the resistance of the electronic cigarette is burned?
Why is it important to constantly monitor this component of the e-cigarette?
Here are all the most valuable clarifications on the subject.
Burnt resistance? Here are the signs.
The resistance of the e-cigarette is a fundamental component for the device for vaping. It is precisely through it that it is possible to heat vape liquid with nicotine to transform them into steam.
When the resistance burns, however, it is significant to replace it.
Here’s how to tell when this moment has arrived.
The first clue is taste.
When the coil is working correctly and is not exhausted, you can fully enjoy the e cigarette flavors contained in the e liquids.
On the other hand, if it is burned, shot after shot, it will begin to release an unpleasant, acrid taste, which tastes burnt.
The second, you could find it by paying attention to the amount of steam produced.
When the coil is burned, its action against e cig liquids is altered. Therefore, the volume of steam produced will also be less than usual.
The third clue is visual and, therefore, unmistakable.
Looking inside the atomizer, if you see that the cotton has darkened or even turned black and the resistance, there is no doubt that you are facing a burnt coil.
In this case, even the liquid in the electronic cigarette could darken, so it is better to eliminate it with the exhausted coil.
Read also: What is the cost of an e cigarette resistor? Here’s the answer.
Resistance burned after 1 day: is it possible?
If you happened to pick up on the clues we talked about in the previous paragraph just after a day of using a new resistance, chances are you’re wondering if an e-cigarette coil can burn out so quickly.
Well, the answer is yes.
In most cases, this happens because the coil was probably not initialized correctly.
What does it mean?
When replacing the old resistance with a new one, before turning on the device for vacuuming, it is essential to impregnate the cotton with a few drops of liquid manually.
In the initial phase, the absorption of liquids by the wicks is prolonged — primarily if you use an e-liquid base with a high concentration of vegetable glycerin — and if the cotton at the time of ignition is dry, the coil is dry will burn from the beginning.
Keep in mind that, on average, for cotton to absorb liquids well, it is necessary to wait at least ten minutes.
From the outside, it is difficult to understand if the cotton has become soaked or not, so it is better not to hurry to be sure to obtain a quality vaping experience without risking having to replace two coils in a day.
Why is it essential to replace the resistance of the electronic cigarette when it is burned?
Now that you know the main signs that indicate that the resistance of your e-cigarette has burned, it is necessary to clarify why, in these cases, it is crucial to replace it as soon as possible.
The first reason is to be connected to the experience of vaping.
Vaping liquids that taste like burnt is certainly not pleasant!
In addition to this, however, there is a health issue to consider.
Combustion residues, as is well known, are harmful to the human organism. But not only that: even the excessive overheating of e-cigarette liquids (caused by the altered functioning of the burned coil) can generate the production of other substances harmful to humans, such as formaldehyde.
That said, replacing the coils as soon as you realize that they are exhausted does not run any risks; the problem arises only if you continue to vape with the resistance burned for a long time.
Read also: How to clean the resistance (and the atomizer) of the electronic cigarette
To conclude
As we have seen, understanding when the resistance of an electronic cigarette is burned is simple. The warning signs are apparent, and what you need to do is to proceed with the replacement.
To ensure the correct functioning of the coil and the atomizer of the electronic cigarette, we also advise you to provide for the proper cleaning of the various components constantly.
Only by taking care of your vaping device and choosing only the best tobacco, fruity or premium e liquids, you will be able to live satisfying and safe vaping experiences.
After this in-depth analysis, hoping that it has been helpful to you, we invite you to visit our online e cig store Terpy.com.
Choose from a wide choice of e liquids flavors, vape bases and liquid nicotine, or buy the new resistors for your e-cigarette or directly a new kit.
With Terpy products, you can live enriching and safe vaping experiences. We are waiting for you!